Log InCartCall Now: (616) 667-7297

Shredding Shedding Problems

????????This is the time of year the big shedding breeds come in. They’re often the ones that haven’t been groomed in FOREVER. You know the ones – Goldens…arctic-type breeds…Saint Bernards. They have that coat that totally trashes your salon – and maybe even you. There are tricks to getting this type of job done without too much agony.  For anyone who’s missed this blog in the past – it’s a perfect time to revisit my blog on salvage work.

As many of you know, I’m a big dog person.  Working on these large furry dogs is one of my favorite things to do in a grooming salon.  Call me crazy – but I just love the transformation in this type of job.  Over the years, the process rarely makes me cringe, no matter the size or condition of the dog – I see it as a fun challenge!

Read the rest of this entry »


What Is the Difference Between Rakes and Undercoat Rakes?

Illustration 1

Illustration 1

These tools can be confusing. When you read their descriptions in catalogs, they’re so similar…

They do the same thing, don’t they?

No, they don’t. Let me explain.

Both remove undercoat on thick coated dogs. It’s the METHOD of removal that varies. One pulls out dead and shedding coat without cutting the fur. The other has sharp, curved teeth which remove the undercoat but will also cut the coat. One is used primarily on dry coats, both before and after the bath. The other is effective prior to shampooing, during the bathing process, and after the dog is clean and dried.

Illustration 2

Illustration 2

The difference isn’t so much in the names. The names are interchanged all the time. To keep them straight in my own mind, I call them different things. It’s particularly beneficial when giving directions to others to utilize different names.

Rakes

Rakes are designed to pull out dead coat and shedding fur with ease. Typically they are a T-shape (see Illustration 1) with rounded pins on the head of the T. On some heads, the top bar is long, up to 6 inches across. On other designs, the head may be only a couple of inches wide. The length and shape of the teeth will vary, too. On some rakes (see Illustration 2), the teeth are short and shaped almost in a tiny cone-type fashion. With others, the teeth are long, sinking deeply into heavy, long coats. On almost all models, the handle comes directly out from the cross bar head with all the teeth.

This type of rake is designed to remove dead coat while not damaging the healthy coat. You work the tool in the natural direction of the coat growth. Care must be used not to sink the comb too far into a dense coat repeatedly with too much pressure. Tugging too firmly on a thick or tangled coat will be uncomfortable for the dog and difficult for the groomer. Repeatedly digging in too deeply could injure the skin, as well.

Illustration 3

Illustration 3

Used correctly, rakes can be highly efficient for removing dead coat or “lint” from rustic-coated breeds. They are used primarily on double-coated, heavy-coated, or rustic-coated dogs.

Undercoat Rakes

Undercoat rakes have many small, sharp, curved blades set close together that remove undercoat. They are available in a variety of tooth widths, making this tool suitable for a wide range of breeds. On shedding breeds, they can remove dead, fuzzy undercoat in minutes, yet leave the top coat shiny and healthy. On harsh-coated dogs, they mimic the hand-stripped look quickly and easily.

Undercoat rakes can be used on a wet or a dry coat. Pull the rake in the direction of the coat growth.Always start with a wider toothed rake to start (see Illustration 3). Work down to narrower teeth as the tool pulls through easily, removing less and less coat.

Undercoat rakes normally work better when used prior to bathing or in the tub on a wet coat.

Illustration 4

Illustration 4

Use caution when working with this tool. On some coat types, especially heavy-coated dogs, they will cut the top coat while removing the undercoat. While the blades are curved (see Illustration 4), you still need to be careful how much pressure you put on the tool as you drag it through the coat so you do not injure the skin. Use caution when working around areas where the skin is thin like in the hock area, ear junctions, flank, and armpits.

Undercoat rakes work well on many coat types including double coated breeds, heavy coats, and rustic coat types. The work exceptionally well on any breed that is hand-stripped like many of the Sporting or Terrier breeds. Just be sure to monitor your progress as you work this tool over the dog.

Here is a cool trick I have seen used with undercoat rakes. This trick minimizes cutting the coat while pulling out dead coat, particularly once the coat is clean and dry. Simply take a thick rubber band and wrap it around the hooks of the blade (see Illustration 5). The rubber protects the coat from excessive cutting while the rubber helps grip the dead coat, allowing to be pulled out almost effortlessly.

Illustration 5

Illustration 5

Happy trimming!

Melissa

 MVpaw_no_Inner_whiteWhich raking tools do you prefer? Why do you like some more than others? What would you recommend to a newer groomer?  Jump on the Learn2GroomDogs.com Facebook page and tell us!


It’s Shedding Season!

DGBy Melissa Verplank, CMG & Paragon Founder

It’s shedding season in the northern hemisphere. All those heavy coated bath and brush dogs have begun the seasonal shedding process. It’s my favorite time of year!

Is it messy? Absolutely. Can it be a lot of work? You bet. But if you’re prepared, have the right tools, and know the tricks, it doesn’t take that long. And it’s not that hard. I don’t know about you, but for me, this is the most gratifying grooming work. There is nothing more rewarding. I love the feel. I love the smell. I love to watch the dogs move as their coat floats and glistens in the sun.

I love big furry dogs. My husband and I live with three Maremma Sheepdogs. We live on a farm in Michigan and experience all four seasons. Seasonal shedding is something we battle every year. As owners of a grooming school, we are fortunate to have our dogs groomed on a regular basis.

Pearl2editAfter a recent grooming session, our Maremmas came home looking and feeling great. However, although one looked amazing, a closer inspection told a different story. Her loose and shedding coat was still stuck next to her skin. In another week, we were going to have a mess. She was going to start leaving tufts of white fur everywhere. When done well, all the packed coat is removed and a comb will glide through the coat from the skin out. Each hair shaft stands independently. This wasn’t the case with this grooming.

As professional pet groomers, we are problem solvers. People bring us dirty dogs. Shedding dogs. Stinky dogs. Overgrown dogs. Matted dogs. Our job is to clean them up while treating them with respect and compassion. The faster and safer we can get though a big job, the better is it for all involved – people and pets. But we want to be thorough at the same time. If a grooming job is not going to hold up or it’s not thoroughly done, the client isn’t going to come back and/or become a repeat customer.

What are the tricks to get these heavily coated, shedding dogs done in the least amount of time?

Here’s what I think about every single time I groom a heavy coated dog:

The bigger and messier it is, the more impressive and rewarding the outcome will be.

  1. A clean coat is going to facilitate speed in the grooming process. Let’s face it, it’s much more enjoyable to work on a clean coat versus a dirty coat! Let the shampoo do a lot of the work for you. If you remove the dirt prior to doing a lot of brushing, your products and your tools can do most of the work for you to remove matted and shedding coat. My rule of thumb is if the water can penetrate to the skin, get the dog directly to the tub. If there are sections that are so dense that water can’t penetrate, cut those areas into sections so that it can. Do at least two lathers with a shampoo. The first one can be quick and the second lather much more thorough. Occasionally, you might need a third lather in certain spots to get it clean. Using a great conditioning treatment after the bathing process can also be very beneficial.
  2. pearl3editA powerful high velocity dryer or “blaster” is the key to getting through this type of grooming job. A powerful stream of air from the high velocity dryer will do the bulk of the work for you when it comes to removing mats, tangles, and shedding coat. Ideally, you will want to have a condenser cone on the nozzle of the dryer when you first start the drying process. On well-behaved dogs who enjoy the high velocity dryer, two or even three high velocity dryers can be used to speed up the entire process. On pets that have a lot of mats, tangles, and densely packed coat, using a high velocity dryer with a condensing nozzle to blow the shampoo out of the coat on the second lather in the tub is a great trick. What do you do when you have a ring on your finger that you can’t get off? Apply soap, right? The same principle applies. The shampoo provides the lubrication and air pushes the hair apart. Easy on the dog – and easy on you.
  3. Being efficient and effective starts with focus. Your eyes should always be looking directly where the air is striking. Hold the dryer nozzle as close to the skin as possible without curling the hair onto itself, which can cause whip knots. (These whipped knots are almost impossible to remove.) As you’re moving the nozzle around the dog, watch for problem areas with the skin and coat. As the air strikes an area, the coat spiders out. The spidering area is loose coat, mats, and tangles as it’s pushed out and away from the skin.
  4. Elbow grease is a must. Once all the problem areas have been loosened and pushed out as much as possible, it’s time to remove the condenser cone and pick up the brush. You will brush using a pat-and-pull method just where the air is striking. It’s a very soft and methodical brushing technique. Done correctly, it’s highly effective while also being gentle on the dog. Brush only where the air is concentrated. This allows you brush to work through the rest of the problem area while the air blows excessive fur out of the way and off the dog.
  5. Pearl4editBe methodical. Be kind. Be considerate to the needs of the pet. Sometimes, on these heavily coated dogs, slowing it down will actually speed you up. Be thorough. The dog is not done until a wide toothed comb can be sunk down to the skin and pulled smoothly through the coat. Feel for dampness. Feel for inconsistency in coat density. Let your fingers sink to the skin. Let your hands be your guide. If anything triggers a quality control check, don’t ignore it. Go back and redo that area.

This type of work is a challenge. Not everybody can do it well. But those who do enjoy working on the large and the furry know what I’m talking about. We love it. I get so much gratification seeing piles of loose coat on the floor. I love those days when we have to empty out our shop vac multiple times because of so much shedding coat floating around the salon! At the end of those days, I know I’ve earned my money (and a glass of vino!)

If you’d like to learn the details of dealing with a heavy coated dog, here are some resources:

Notes From the Grooming Table16_CMYK_Grooming_Cover_4-18Bnew-image

Bathing, Drying, Brushing, and Structure of a Mat sections

Notes From the Grooming Table – DIGITAL EXPERIENCE

Use the search tool to quickly find: Bathing, Drying, Brushing, and Structure of a Mat sections

Theory of 5:

Bath and Brush section

Learn2GroomDogs.com

streaming video lessons:

  • Bathing & Drying Combination Coat
  • Bathing & Drying Heavy Coated
  • Brushing Skills
  • Finishing the Bath & Brush Style Pet
  • Salvage Work on a Heavy Coated Dog
  • Structure of a Mat
  • The Magic of Forced Air Drying
  • Speed & Efficiency – How to Groom a Monster Sized Dog in 76 Minutes

I love seeing a coat that glimmers in the sun. That moves with the dog as it moves. When you sink your hands into it, it feels soft and silky. Not only does the dog look good – they smell good too! The dog knows it. They have an air of distinction – they are proud and it shows. This type of work, done well, makes me proud to be a professional pet groomer.

~Happy trimming,

Melissa

P.S. Did I miss any tricks? Tell me what works for you.  Jump on the Learn2GroomDogs.com Facebook page and tell us about it.


What Is the Difference Between Rakes and Undercoat Rakes?

Illustration 1

Illustration 1

These tools can be confusing. When you read their descriptions in catalogs, they’re so similar…

They do the same thing, don’t they?

No, they don’t. Let me explain.

Both remove undercoat on thick coated dogs. It’s the METHOD of removal that varies. One pulls out dead and shedding coat without cutting the fur. The other has sharp, curved teeth which remove the undercoat but will also cut the coat. One is used primarily on dry coats, both before and after the bath. The other is effective prior to shampooing, during the bathing process, and after the dog is clean and dried.

Illustration 2

Illustration 2

The difference isn’t so much in the names. The names are interchanged all the time. To keep them straight in my own mind, I call them different things. It’s particularly beneficial when giving directions to others to utilize different names.

Rakes

Rakes are designed to pull out dead coat and shedding fur with ease. Typically they are a T-shape (see Illustration 1) with rounded pins on the head of the T. On some heads, the top bar is long, up to 6 inches across. On other designs, the head may be only a couple of inches wide. The length and shape of the teeth will vary, too. On some rakes (see Illustration 2), the teeth are short and shaped almost in a tiny cone-type fashion. With others, the teeth are long, sinking deeply into heavy, long coats. On almost all models, the handle comes directly out from the cross bar head with all the teeth.

This type of rake is designed to remove dead coat while not damaging the healthy coat. You work the tool in the natural direction of the coat growth. Care must be used not to sink the comb too far into a dense coat repeatedly with too much pressure. Tugging too firmly on a thick or tangled coat will be uncomfortable for the dog and difficult for the groomer. Repeatedly digging in too deeply could injure the skin, as well.

Illustration 3

Illustration 3

Used correctly, rakes can be highly efficient for removing dead coat or “lint” from rustic-coated breeds. They are used primarily on double-coated, heavy-coated, or rustic-coated dogs.

Undercoat Rakes

Undercoat rakes have many small, sharp, curved blades set close together that remove undercoat. They are available in a variety of tooth widths, making this tool suitable for a wide range of breeds. On shedding breeds, they can remove dead, fuzzy undercoat in minutes, yet leave the top coat shiny and healthy. On harsh-coated dogs, they mimic the hand-stripped look quickly and easily.

Undercoat rakes can be used on a wet or a dry coat. Pull the rake in the direction of the coat growth.Always start with a wider toothed rake to start (see Illustration 3). Work down to narrower teeth as the tool pulls through easily, removing less and less coat.

Undercoat rakes normally work better when used prior to bathing or in the tub on a wet coat.

Use caution when working with this tool. On some coat types, especially heavy-coated dogs, they will cut the top coat while removing the undercoat. While the blades are curved (see Illustration 4), you still need to be careful how much pressure you put on the tool as you drag it through the coat so you do not injure the skin. Use caution when working around areas where the skin is thin like in the hock area, ear junctions, flank, and armpits.

Illustration 4

Illustration 4

Undercoat rakes work well on many coat types including double coated breeds, heavy coats, and rustic coat types. The work exceptionally well on any breed that is hand-stripped like many of the Sporting or Terrier breeds. Just be sure to monitor your progress as you work this tool over the dog.

Here is a cool trick I have seen used with undercoat rakes. This trick minimizes cutting the coat while pulling out dead coat, particularly once the coat is clean and dry. Simply take a thick rubber band and wrap it around the hooks of the blade (see Illustration 5). The rubber protects the coat from excessive cutting while the rubber helps grip the dead coat, allowing to be pulled out almost effortlessly.

Happy trimming,

-Melissa

Illustration 5

Illustration 5

P.S.

Do you have any tips to share?  Jump over to the Learn2GroomDogs Facebook page  and tell us.


error: Content is protected !!